Finally a Japanese made down pipe for the US Supras!!!!! Great quality and an excellent price. Downpipes are the FIRST modification you should make to your twin-turbo Supra. Downpipes are the section of the exhaust that comes off the turbo's and replaces BOTH catalytic convertors on your car.

Your factory or ANY after-market exhaust will bolt right up to the down pipe with no other parts required.

The reduction in backpressure and the free flowing exhaust will create a legitimate 40HP. THIS IS A MUST FIRST MODIFICATION!!

At SupraStore.com we understand the need for those that want to run a high flow catalytic converter along with a down pipe, so we have created that for you. Look for that on this same page.

Comparison photo of stock cat downpipe vs cat delete downpipe.

Installation Tip:

My first recommendation is to have a competent muffler shop do the install (that is if they will remove the CATS). If not, then you MUST pre-soak the bolts/nuts where the factory downpipe comes off the turbo with WD40 or Liquid Wrench for a few hours (literally soak those bolts!!). This should help considerably. Then use a 6 point socket (not a 4 pt.) and a small breaker-bar to remove the nuts. Many people have had problems using an impact/air gun as the torque is so high, they often snap the bolts in half.

Save some money and buy our own Suprastore.com downpipe, which is 100% stainless steel.

For Off-Road Use Only