SupraStore V8 Cylinder Head Refresh with Pocket Port and Valve Job 1UZ 1UZFE 2UZ 2UZFE 3UZ 3UZFE VVTi or non
Click to Enlarge
SupraStore V8 Cylinder Head Refresh with Pocket Port and Valve Job 1UZ 1UZFE 2UZ 2UZFE 3UZ 3UZFE VVTi or non

SupraStore V8 Cylinder Head Refresh with Pocket Port and Valve Job 1UZ 1UZFE 2UZ 2UZFE 3UZ 3UZFE VVTi or non
Item #:
SS-UZ-PP
$2,300.00
$1,650.00
You save:
28%
1UZ non-VVTi Valve Springs/Retainers: 
1UZ non-VVTi Oversized Valves: 
VVTi Valve Springs/Retainers: 
VVTi Oversized Valves: 
Shipping: 
Availability:
Usually ships in 1-2 weeks
Quantity:
Send to a Friend

We're offering this same service we have offered on JZ engines, now for Toyota V8s as well! Second picture shows actual flow bench gains from our JZ service.

This service includes modifying both heads, not just one side. You get a full port job, 5 angle valve job, cylinder head inspection, and the heads get hot tanked for a proper cleaning. We offer this service for all UZ engines, VVTi or non. Regardless of what chassis your engine is out of, we service them all! LS400, LS430, GS400, GS430, SC400, SC430, Land Cruiser, Tundra, Sequoia, GX470, LX470, etc.

For the 1UZ non-VVTi engines from 89-97:
We offer a spring and titanium retainer kit using Brian Crower parts. We also can get custom valves that are +1mm oversized and use a shimless bucket to adjust the valves after installation.

For the 1UZ VVTi, all 2UZ, and all 3UZ engines from 1998-2013:
We offer a spring and titanium retainer kit using SuperTech parts. SuperTech also makes +1.5mm oversize valves that fit these applications that we can build the heads for and include/install with.

You cannot define every possibility in a single description or for all applications, but 'generally' speaking, what we provide with our Street Cylinder Head Refresh package is great for up to 8,000RPM, more RPM would be possible with proper optional valve train.

In reality, no matter what purpose/intended use of your build, you will benefit! The truth is unless you are building a 1300HP+ drag car, you can pretty much eliminate any serious deep cylinder head porting. You simply do not gain enough volumetric efficiency by hogging out a ton of metal in the heads, unless you are running a silly-high lift custom cam.

If you live outside of the USA, NO PROBLEM! Please contact us for a shipping quote and we will be happy to help you out!