This fuel pressure conversion kit is designed to convert stock 1JZGTE fuel systems to a true rising rate fuel pressure regulated system.

This kit is 100% complete with all parts you need to remove your static kit (including fuel pressure gauge) and replace it, so you can control static fuel pressure at idle. This will allow you to raise the idle fuel pressure and therefore provide more pressure and flow to your stock or aftermarket injected 1JZ. Raising the fuel pressure will allow for more power to be made.

The kit includes all that you need. If you do not have a fuel pressure regulator (FPR), then you can choose from the Aeromotive version or a good quality generic unit we have good success with.

This kit is ideal for those who run higher boost on stock turbos or have a small single turbo and are not ready yet for an entire new fuel system.

As with any fuel and turbo combination, all power levels should be confirmed with a good dyno tune and wideband monitoring. You should also set it to make 38 psi of fuel with the vacuum nipple pulled at idle.