** Includes AEM EMS **

This is the ultimate stock twin turbo replacement package for those on a budget who want to start out on the factory fuel system and then in the future possibly upgrade the injectors.

It has been made as a road racer, autocross, and ultimate quick spool up package from SupraStore.com. Our kit is based around the ProSeries turbo kit and is configured with a full face 360 degree thrust bearing Precision or Borg Warner turbo. The smaller A/R 61mm turbo will spool like factory, make approximately 525rwhp at 21psi, and 600+ at full boost.

APPLICATION: 1993 to 2002 Supra Twin Turbo Non-VVT-i or VVT-i!

We at SupraStore.com have put together what we have called the Stage 1 - 700R kit, which produces from 450-700bhp (crankshaft) and drives like stock.

The kit consists of our ProSeries Stage 1 turbo kit and AEM V2 EMS and 3.5 bar map sensor and IAT. We also include a AEM EMS Supra map for your new configuration as part of the package price (valued at $275!!!). The AEM EMS V2 is a state of the art computer and is a direct factory replacement. Remove the old, plug in the new. Load our AEM map and do the final tuning yourself.

What is even more amazing is that we have this same package available for the hard to tune VVT-i 2JZGTE engine Supras and Aristos as well!! It includes the only AEM EMS VVT-i computer and harness package available in the world!! (it cost's a bit more for the VVT-i package, but it's proven).

We even include a FREE follow-up tune. We will instruct you to go for a drive in your car and log the data on the AEM EMS V2. You will then email the logs to us and we will modify your MAP to offer better drivability. Please understand this is for a BASE tune, we cannot give a proper final tune without having the car, and we can only get close at best. You will need to work with your tuner still to finish it up.

You will receive:

(1) AEM Engine Management System V2 (Non-VVTi or VVTi)

(1) 3.5 Bar Map Sensor

(1) Intake Air Temp Sensor

(1) Custom AEM Map (based upon your car specifics)

(1) SS ProSeries Stage 1 Turbo Kit w/ 61mm Precision Turbo

(1) SUS321 Tig Welded Tubular SupraStore Header

(1) Precision Turbo 46mm or TiAL 44mm V-Band Wastegate

(1) Titan Motorsports 3” Stainless Steel 304 V-Band Downpipe (optional)

(1) Titan Motorsports Oil feed and Return Kit

(1) 4" Conical Air Filter

Please note that our new kit has the Titan Motorsports hand-built (to our specifications) v-band down pipe as an option. The reason we have done this is simple. We figure, most customers can have a down pipe made in just about most cities in the world. However, if want to purchase the best fabricated and priced stainless steel single turbo down pipe on the market--manufactured by hand by the PRO's at Titan Motorsports--this is not a problem, just select from the drop down menu.

As with all single turbo kits, you will need a midpipe (after down pipe) to connect to your exhaust (not provided), but hey, truly any fabricator or higher-end exhaust shop can build this, and one intercooler tube to go from turbo to your current intercooler.

Turbo Specs - Precision Turbo 6176E MFS

61mm inducer compressor wheel

• "S" compressor cover 4.0" inlet/2.5" outlet

• 65mm turbine wheel

• Turbine housing options:

T4 Tangential .81 A/R with 3 5/8" V-Band discharge

• 360° journal bearing system

Note: We can supply almost any turbo with our kits, so if you have a strong preference, let us know. We sell Borg Warner, COMP, Garrett, PHR, Precision and Turbonetics turbos. Picture shows optional downpipe and intercooler pipe.

2200 Degree F ceramic coating shown in picture with two manifolds (optionally available)

It is the customers responsibility to make sure the car is professionally tuned by someone familiar with turbo cars and preferably Supra's. Wide band oxygen sensor tuning especially required.

AEM EMS VVT-i kit shown (optional)